Cisco CCST-Networking Exam Questions - Pass4sure CCST-Networking Dumps Pdf

P.S. Free 2025 Cisco CCST-Networking dumps are available on Google Drive shared by TorrentExam: https://drive.google.com/open?id=1uUFK6t4NuQAGg5SAQiPEIDVuzbuJ84IB

When you decide to purchase our CCST-Networking exam questions, if you have any trouble on the payment, our technician will give you hand until you successfully make your purchase. And more importantly, if you have bought your CCST-Networking preparation materials, but you find there is some trouble in downloading or applying, our technician can also solve this matter for you. In a word, anytime if you need help, we will be your side to give a hand. We offer the best service on our CCST-Networking Study Guide.

Cisco CCST-Networking Exam Syllabus Topics:

Topic	Details
Topic 1	Standards and Concepts: The Cisco CCST-Networking exam assesses network technicians' knowledge of essential networking concepts, including identifying network building blocks, differentiating bandwidth from throughput, distinguishing various network types (LAN, WAN, MAN, CAN, PAN, WLAN), and comparing cloud versus on-premises services. It also measures understanding of common network applications and protocols.
Topic 2	Diagnosing Problems: In the CCST-Networking exam, Cisco network technicians are tested on their ability to employ troubleshooting methodologies and help desk practices, perform packet captures with Wireshark, run and interpret diagnostic commands. It also tests their skills to differentiate data collection methods for network devices, and execute basic show commands on Cisco devices.
Topic 3	Addressing and Subnet Formats: For aspiring Cisco network technicians, the CCST Networking exam evaluates the ability to compare private and public IP addresses, identify IPv4 addresses and subnet formats, and recognize IPv6 addresses and prefix formats. This ensures they can manage and configure network addressing effectively.
Topic 4	Security: Aspiring Cisco Network technicians taking the CCST-Networking Exam need to describe firewall operations, foundational security concepts, and configure basic wireless security on home routers (WPAx). This ensures they can implement and understand essential security measures within a network.
Topic 5	Infrastructure: The Cisco Certified Support Technician (CCST) Networking exam measures network technicians' skills in identifying Cisco device status lights, using network diagrams to attach cables, recognizing various network ports. It also focuses on explaining basic routing concepts and understanding basic switching concepts.

>> Cisco CCST-Networking Exam Questions <<

Avail Latest CCST-Networking Exam Questions to Pass CCST-Networking on the First Attempt

Many users report to us that they are very fond of writing their own notes while they are learning. This will enhance their memory and make it easier to review. Our CCST-Networking exam questions have created a PDF version of the CCST-Networking practice material to meet the needs of this group of users. You can print the PDF version of the CCST-Networking learning guide so that you can carry it with you. As long as you have time, you can take it out to read and write your own experience.

Cisco Certified Support Technician (CCST) NetworkingExam Sample Questions (Q41-Q46):

NEW QUESTION # 41
Computers in a small office are unable to access companypro.net. You run the ipconfig command on one of the computers. The results are shown in the exhibit.
You need to determine if you can reach the router.

Which command should you use? Complete the command by selecting the correct options from each drop- down lists.

Answer:

Explanation:

Explanation:
To determine if you can reach the router, you should use thepingcommand followed by the IP address of the router. Thepingcommand is a network utility used to test the reachability of a host on an Internet Protocol (IP) network and to measure the round-trip time for messages sent from the originating host to a destination computer.
The Default Gateway in theipconfigresults is typically the router's IP address in a home or small office network. In this case, the Default Gateway is192.168.0.1, which is the address you would ping to check connectivity to the router.
References:=
* How to Use the Ping Command
* Testing Network Connectivity with the Ping Command
To determine if you can reach the router, you should use thepingcommand with the IP address of the router.
* Command:ping
* Target:192.168.0.1
So, the completed command is:
* ping 192.168.0.1
Step by Step Comprehensive and Detailed Explanation:
* ping: The ping command sends ICMP Echo Request messages to the target IP address and waits for an Echo Reply. It is commonly used to test the reachability of a network device.
* 192.168.0.1: This is the IP address of the default gateway (the router) as shown in theipconfigoutput.
Pinging this address will help determine if the computer can communicate with the router.
References:
* Using the ping Command: ping Command Guide

NEW QUESTION # 42
Move each protocol from the list on the left to its correct example on the right.

Answer:

Explanation:

Explanation:
The correct matching of the protocols to their examples is as follows:
* DHCP: Assign the reserved IP address 10.10.10.200 to a web server at your company.
* DNS: Perform a query to translate companypro.net to an IP address.
* ICMP: Perform a ping to ensure that a server is responding to network connections.
Here's how each protocol corresponds to its example:
* DHCP (Dynamic Host Configuration Protocol)is used to assign IP addresses to devices on a network. In this case, DHCP would be used to assign the reserved IP address 10.10.10.200 to a web server.
* DNS (Domain Name System)is used to translate domain names into IP addresses. Therefore, to translate companypro.net to an IP address, DNS would be utilized.
* ICMP (Internet Control Message Protocol)is used for sending error messages and operational information indicating success or failure when communicating with another IP address. An example of this is using the ping command to check if a server is responding to network connections.
These protocols are essential for the smooth operation of networks and the internet.
* Perform a query to translate companypro.net to an IP address.
* DNS (Domain Name System): DNS is used to resolve domain names to IP addresses.
* Assign the reserved IP address 10.10.10.200 to a web server at your company.
* DHCP (Dynamic Host Configuration Protocol): DHCP is used to assign IP addresses to devices on a network.
* Perform a ping to ensure that a server is responding to network connections.
* ICMP (Internet Control Message Protocol): ICMP is used by network devices to send error messages and operational information, and it is the protocol used by the ping command.
* DNS (Domain Name System): DNS translates human-friendly domain names like "companypro.net" into IP addresses that computers use to identify each other on the network.
* DHCP (Dynamic Host Configuration Protocol): DHCP automatically assigns IP addresses to devices on a network, ensuring that no two devices have the same IP address.
* ICMP (Internet Control Message Protocol): ICMP is used for diagnostic or control purposes, and the ping command uses ICMP to test the reachability of a host on an IP network.
References:
* DNS Basics: What is DNS?
* DHCP Overview: What is DHCP?
* ICMP and Ping: Understanding ICMP

NEW QUESTION # 43
What is the purpose of assigning an IP address to the management VLAN interface on a Layer 2 switch?

A. To enable the switch to act as a default gateway for the attached devices
B. To enable the switch to resolve URLs for the attached the devices
C. To enable the switch to provide DHCP services to other switches in the network
D. To enable access to the CLI on the switch through Telnet or SSH

Answer: D

Explanation:
The primary purpose of assigning an IP address to the management VLAN interface on a Layer 2 switch is to facilitate remote management of the switch. By configuring an IP address on the management VLAN, network administrators can access the switch's Command Line Interface (CLI) remotely using protocols such as Telnet or Secure Shell (SSH). This allows for convenient configuration changes, monitoring, and troubleshooting without needing physical access to the switch1.
References :=
*Understanding the Management VLAN
*Cisco - VLAN Configuration Guide
*Remote Management of Switches
Assigning an IP address to the management VLAN interface (often the VLAN 1 interface by default) on a Layer 2 switch allows network administrators to remotely manage the switch using protocols such as Telnet or SSH. This IP address does not affect the switch's ability to route traffic between VLANs but provides a means to access and configure the switch through its Command Line Interface (CLI).
*A: The switch does not act as a default gateway; this is typically a function of a Layer 3 device like a router.
*B: The switch does not resolve URLs; this is typically a function of DNS servers.
*C: The switch can relay DHCP requests but does not typically provide DHCP services itself; this is usually done by a dedicated DHCP server or router.
Thus, the correct answer is D. To enable access to the CLI on the switch through Telnet or SSH.
References :=
*Cisco VLAN Management Overview
*Cisco Catalyst Switch Management

NEW QUESTION # 44
An engineer configured a new VLAN named VLAN2 for the Data Center team. When the teamtries to ping addresses outside VLAN2 from a computer in VLAN2, they are unable to reach them.
What should the engineer configure?

A. Default gateway
B. Static route
C. Additional VLAN
D. Default route

Answer: A

Explanation:
When devices within a VLAN are unable to reach addresses outside their VLAN, it typically indicates that they do not have a configured path to external networks. The engineer should configure a default gateway for VLAN2. The default gateway is the IP address of the router's interface that is connected to the VLAN, which will route traffic from the VLAN to other networks12.
References :=
*Understanding and Configuring VLAN Routing and Bridging on a Router Using the IRB Feature
*VLAN 2 not able to ping gateway - Cisco Community
*VLANs: Virtual Local Area Networks (VLANs) logically segment network traffic to improve security and performance. Devices within the same VLAN can communicate directly.
*Default Gateway: For devices in VLAN2 to communicate with devices outside their VLAN, they need a default gateway configured. The default gateway is typically a router or Layer 3 switch that routes traffic between different VLANs and subnets.
*Additional VLAN: Not needed in this scenario as the issue is related to routing traffic outside VLAN2, not creating another VLAN.
*Default Route: While a default route on the router may be necessary, the primary issue for devices within VLAN2 is to have a configured default gateway.
*Static Route: This is used on routers to manually specify routes to specific networks but does not address the need for a default gateway on the client devices.
References:
*Cisco VLAN Configuration Guide: Cisco VLAN Configuration
*Understanding and Configuring VLANs: VLANs Guide

NEW QUESTION # 45
During the data encapsulation process, which OSI layer adds a header that contains MAC addressing information and a trailer used for error checking?

A. Transport
B. Data Link
C. Session
D. Network

Answer: B

Explanation:

OSI model
During the data encapsulation process, theData Link layerof the OSI model is responsible for adding a header that contains MAC addressing information and a trailer used for error checking.The header typically includes the source and destination MAC addresses, while the trailer contains a Frame Check Sequence (FCS) which is used for error detection1.
The Data Link layer ensures that messages are delivered to the proper device on a LAN using hardware addresses and translates messages from the Network layer into bits for the Physical layer to transmit. It also controls how data is placed onto the medium and is received from the medium through the physical hardware.
References:=
* The OSI Model - The 7 Layers of Networking Explained in Plain English
* OSI Model - Network Direction
* Which layer adds both header and trailer to the data?
* What is OSI Model | 7 Layers Explained - GeeksforGeeks

NEW QUESTION # 46
......

As we all know, it is difficult for you to prepare a CCST-Networking exam by yourself. You will feel confused about some difficult knowledge. Now, you are fortunate enough to purchase our CCST-Networking study questions. Our study materials are compiled by professional experts. They have researched the annual Real CCST-Networking Exam for many years. So once you buy our study materials, you will save a lot of troubles.

Pass4sure CCST-Networking Dumps Pdf: https://www.torrentexam.com/CCST-Networking-exam-latest-torrent.html

P.S. Free 2025 Cisco CCST-Networking dumps are available on Google Drive shared by TorrentExam: https://drive.google.com/open?id=1uUFK6t4NuQAGg5SAQiPEIDVuzbuJ84IB